文章摘要
引用本文:李振伟, 罗纪, 韩放, 高庆华, 王晶.火星车低气压无风热环境模拟试验技术[J].航天器环境工程,2018,35(4):382-387 本文二维码信息
二维码(扫一下试试看!)
火星车低气压无风热环境模拟试验技术
Low-pressure thermal environmental simulation test technology for Mars rover model under wind-free condition
投稿时间:2018-01-09  修订日期:2018-07-23
DOI:10.3969/j.issn.1673-1379.2018.04.013
中文关键词:  火星车  热环境  调温系统  压力控制  气体温度测量
English Keywords:Mars rover  thermal environment  temperature regulation system  pressure control  gas temperature measurement
基金项目:国家重大科技专项工程
作者单位
李振伟, 罗纪, 韩放, 高庆华, 王晶 北京卫星环境工程研究所, 北京 100094 
摘要点击次数: 527
全文下载次数: 546
中文摘要:
      为模拟火星车工作时所处大温差、低气压环境,文章以自主研制的调温热沉系统和压力控制系统为依托,实现试验容器热沉系统温度在-135~27℃间任意快速调节,均匀性优于±5℃;试验容器内气体压力控制值与目标压力值之差在±10 Pa之内。在国内首次完成无风环境下的火星车温控模拟舱验证试验,为火星车热分析模型修正以及后续火星车有风热环境试验提供了参考。
English Summary:
      To simulate a wind-free high temperature and low pressure environment in which the Mars rover would work, based on the GN2 heat sink temperature regulation and a pressure control system, the goal is achieved for regulating the temperature of the heat sink system in a range of -135℃ to 27℃, with the uniformity of the temperature better than ±5℃. The bias between the testing pressure value and the target value of the vessel can be controlled to be less than ±10 Pa with the pressure control system. The wind-free verification test of the Mars rover model has been implemented for the first time in China. The result provides a basis for updating the thermal analysis model of the Mars rover and the subsequent wind-loaded environmental test.
查看全文  查看/发表评论  下载PDF阅读器